cold storage sandwich panels
Cold storage sandwich panels and their features:
Cold storage Locked sandwich panel features and types.
There are two types of cold room sandwich panels used in cold storages.
One of these is the most commonly used cold storage pur panel and the other is the PIR panel.
Pure panel all kinds cold storage The cold room that we can use whenever we need is a locked sandwich panel.
Multiple panels Its burning property is 20% higher than the normal panel. Therefore, this panel is preferred in large systems.
The thickness of all these panels is produced in thicknesses of 0.60 mm, 0.80 100 120 150 180 200 250 300 millimeters.
cold storage interlocking sandwich panels Both sides are 0.50 millimeter thick galvanized RAL 9002 painted.
Again cold storage floor panels It is produced in the thicknesses mentioned above and the lower part is covered with 0-5 millimeter galvanized sheet metal and the upper part is covered with 09 millimeter thick Plywood.
modular cold room Installation work can be completed in half an hour with the ready-made corner panels produced for .
The insulation properties of all these panels are 42 density and PIR and Pur feature polyurethane filling.
Cold storage isothermal doors Doors produced according to the desired dimensions are produced with the same density using sheet metal and polyurethane filling system suitable for the same panel thickness.