INDUSTRIAL COLD STORAGE DOORS
HINGED
Designed to meet more stringent health and safety regulations than any other product on the market, the hinged wing door is the classic cold storage door for small cold cells. Both series are available in positive temperature, low temperature, and overhead versions, with a variety of colors and stainless steel versions available.
SLIDING
Sliding door with injected polyurethane foam insulation resistant to both positive and negative temperatures. The perimeter heating resistor can be directly integrated into the aluminum profile on the wing edge below the seal. Sliding systems for large or lightweight sliding doors. Available in various colors and stainless steel versions.
VERTICAL SLIDING
The manual or automatic vertical sliding door is suitable for all types of positive or negative temperature cells, such as tunnel freezers at -40°C. Consisting of just three elements, a common feature across all our products, this door is extremely easy to install and can be used in walls that lack sufficient space for horizontal sliding but have sufficient space for vertical movement. The door can be equipped with:
“standard” plastic-coated zinc sheet cladding;
stainless steel cladding;
stainless steel and fiberglass cladding.
A wide range of accessories and colours are available.
CONTROLLED ATMOSPHERE
The CA sliding door can be installed in controlled atmosphere curing chambers, as well as in all refrigerated rooms where a temperature not below -5°C and an airtight door is required. Consisting of just three parts, this door is extremely easy to install on any wall and is equipped with clamping levers that ensure a perfectly tight seal of the inspection window. The door can be equipped with:
“standard” plasticized zinc sheet coating;
AUTOMATION
System designed to automate industrial cold storage doors with a frame mounted on the existing manual sliding door track.
Aluminum door rail
Galvanized steel sheets, brackets and hardware
Reversing of identical components for left and right doors with a significant reduction in spare parts inventory costs
Hinged and lockable cover for easy opening and trouble-free maintenance
24Vdc high torque reversible geared motor with integrated encoder
1/2” roller chain drive
Microprocessor based control unit with the following features:
Decoding signals from the encoder
Logical management of all processes
Programmable tripping conditions, step-by-step, on-stop-off
Radar function
Battery charge
Management of security devices
Alarm and flashing light outputs
Connector for radio receiver
Digitally adjustable pause and flashing time from 1 to 99 seconds
Separately adjustable opening, closing and deceleration speed
Interlock management logic integrated into the control unit for up to 5 doors connected in ring configuration with simple twisted pair
Connector for two separate light curtains
Two-digit display showing automation status, number of working cycles and parameters during programming; remote control of the display from up to 20 m away
Easy and user-friendly programming of all door parameters via three buttons on the screen or IR transmitter without opening the electrical panel
Partial opening of 900 mm for pedestrian entry, activated by push button or manual forced opening
FOLDING
This door's special configuration allows for application in walls with limited height and width (loading points, narrow cells), making it the only possible alternative for enclosing medium and low-temperature environments. It is available in a standard version that opens with a counterweight or spring-loaded balancing system, making it extremely easy to open and therefore suitable for installation in supermarkets and environments with a large female population. A wide range of accessories and colors are available.