How to make a good cold room.
There are actually many types of making a good cold room.
One of themconcrete cold room
The other ispanel cold room.
First, let's start with the concrete cold room and how it is made.
How to make a cold room from concrete.
It is beneficial to do it with Ytong. Let's learn our walls with at least ten Ytong.
pluscold room We must use XPS with a thickness of at least 8 centimeters.
If we use XPS pieces with a thickness of four centimeters, let's put one flat and the other vertically on top of each other.
Let's put a net over them and lock them with plastic dowels and fill them with mortar.
Let's burn it. We can layer tiles or marble on top of the mortar filling.
If we are going to make a concrete floor, we must first lay 4 x 4 2 layers of XPS on the floor.
A floor linoleum should be laid on top of it and 10 times 10 centimeters and 6 millimeters thick.
We can put it and pour concrete.
In this way, we can insulate the walls, ceilings and floors and create our cold room.
If we dodull room Here we can increase the insulation to 12 or 16 centimeters.
How to make a cold room from interlocking sandwich panel.
To install the last coin we need the necessary thickness plus at least 8 centimeters for the room and at least 12 and 15 centimeters for the dull room interlocking sandwich panelWe will need it.
interlocking sandwich panelOur specifications should be 0 50 0 50 hair thickness and 42 density.
While meeting our panel needs, we need to determine the ground required for panel installation.Metal accessory.
inner corner metal accessoryand we must provide our outer corner metal accessories.
We should mount our floor accessories on the floor according to the width and length of our cold room.
We must lay our cold room playwood floor panel in such a way that it fits into our floor accessories. We must make connections between them with leak-proof silicone.
We must mount our wall panels by starting from a corner and creating a corner. During assembly, we must apply sealing silicone between the panels and lock our panel locks with an 8-gauge allen.
After placing our ceiling panels, we must install the isothermal door of our cold room.
After this process is completed, we should lay the interior accessories symmetrically with
screws or rivets and cover the joints and accessory edges with white silicone.
After these processes are completedOur cold room cooling devices by assembling it.
cooling systemWe can put it into operation. That's all.