FEATURES OF COOLING UNIT :
Cooling groups are produced under ISO - 9001: 2000 quality assurance system. They are advanced technology products with world leader brands in the field of all cooling equipment used in production. Assembly is made using machines with Kompancotler CNC technology. Our chillers are produced in accordance with European Safety Norms and have the CE label.
COMPRESSOR GROUP:
Hermetic and semi-hermetic or screw semi-hermetic compressors are used in our chillers. Compressors provide high cooling efficiency with low noise level and energy consumption under nominal operating conditions. Our compressor group is presented as caged with RAL 7047 oven painted galvanized sheet. Optionally, it can be polyester painted sheet and CrNi.
Hermetic and semi-hermetic or screw semi- hermetic compressorsare used in our chillers. Compressors provide high cooling efficiency with low noise level and energy consumption under nominal operating conditions. Our compressor group is presented as caged with RAL 7047 oven painted galvanized sheet.
CONDENSER:
The air-cooled condenserconsists of a copper tube with an inflated heat transfer surface and aluminum fins on them, optimized for the highest efficiency triangular arrangement and air flow.
Condenser fans are high efficiency axial fans of European origin and have an IP55 protected electrical box. Side and intermediate mirrors of condensers are aluminum
EVAPORATOR
Evaporators are produced in 2 ways as air cooled and high efficiency.
The heat transfer surface consists of wavy-shaped aluminum fins laid on a blown copper tube bundle.
Evaporator fans are high efficiency axial fans of European origin and have an IP55 protected electrical box.
High quality resistance rods were used for defrosting, and resistance rods were placed in copper pipes for maximum efficiency and durability.
Fan and resistance electrical terminals are collected in an IP55 protected plastic box with terminal blocks.
There is a system consisting of By-Pass pan and drainage hose in order to easily drain the evaporator defrost water.
There is also a pan resistance and a drain hose tail resistance added to the evaporator. The thermostatic expansion valve is shipped mounted on the evaporator inlet.
OTHER EQUIPMENT IN THE SYSTEM :
High – Low pressure protection pressure switch (Combined pressure switch)
Vibration sensors in the compressor input and output line.
Safety valve liquid tank.
Sight glass with humidity indicator.
High capacity dehumidifiers.
Ball valves that do not cause pressure drops in copper pipes.
Oil separator oil filter.
High and low pressure gauges (manometer) on the outdoor unit for ease of service.
Liquid holder (suction accumulator).