How to install cold storage panels

Our topic today is the mistakes made in cold storage panel assembly.

As is known, insulation is important to keep heat in one place. The most ideal solution for keeping the heat in cold storage is the sandwich panel method. Sandwich panels are in standard youth and their length can be used in any desired size.

To make a cold room, cold room floor panel, cold room wall panel, cold room ceiling panel, cold room door and cooling device are needed. For their assembly, cold room metal accessories, Polyurethane Foam screws, Rivets and hand tools are needed.

In today's topic, we will actually do the floor and floor assembly and we will examine it. First of all, the area where we will set up the cold room must be flat. By cleaning the area, we screw your floor accessories to the floor according to your cold room dimensions with the help of the screws that we will throw on the floor should be at least 5 cm long and should be thrown at 30 cm intervals.

First, we start our assembly by combining the corners in the rear right or left corner. Both panels should enter each other by 5 cm during joining, and by applying the polyurethane material very well, by applying the polyurethane material very well, the panels should be leveled and the inner corner accessory rivets should connect both panels with rivets 30 cm apart, the part of the wall panel coming to the floor should be at least 8 cm in the room. The sheet should be cut and removed. we call it a heat bridge. The purpose of this is to cut off the heat transfer and keep the heat inside the room. While the two panels are interlocked, non-freezing silicone must be applied.

After the walls are finished, floor panels should be laid and non-freezing silicone should be applied between the floor panels at the junction points. Filling should be done by squeezing Polyurethane Foam between the wall and the floor panel, the corner should be closed with interior accessories and riveted.

We will talk about other details in our next topic, continue to follow us, best regards

Arama formu

How to install cold storage panels

Top News