Isothermal cold room doors technical specifications

Doors are very important in cold rooms. It is important that the door of the wing and frame of the cold room doors have hygienic conditions that are compatible with each other.

As Keskinso Cooling, we use door frames as Aluminum or PVC.

We never use old type wooden crates, they are not hygienic but healthy.

In the channels in aluminum and PVC cases, we use a reinforced galvanized metal of 3 millimeters in terms of the health of the case.

We increase both the durability and strength of the wing by framing the isothermal cold room door wing edges with anodized aluminum and turning it into a 3 millimeter thick galvanized sheet profile square and cross.

Impact doors also use a lock system that can be opened from inside. Even if it is locked from outside, the person inside can open the door and go outside.

Our sliding door systems, on the other hand, produce the same quality with the same quality as our swing doors. Our sliding doors are 3 millimeter thick anodized Aluminum sliding system.

Our door seals are made in Italy and made of 100% rubber. It is flexible and durable and has a 10-year warranty.

Our sliding doors also have the features of working with remote control system photocell system manual control system. We can do this at the swing door for pedestrian transition to our sliding doors.

Our doors have a 10-year warranty.

You can contact us at info@keskinso.com 0216 311 46 57.

Arama formu

Isothermal cold room doors technical specifications

Top News