How to make a cold room sandwich panel.
Cold storage sandwich panel production Let's examine how it is done.
Cold room interlocking sandwich panel production The first material required is the outer hair.
Galvanized sheets with a thickness of 0 to 50 millimeters are a special sheet used by coating with Ral 9002 Paint by dipping method in a certain micron thickness.
interlocking sandwich panel The width of the sheet is 111.5 centimeters and the width of the sheet including the edge bends is 120 centimeters.
Dimensions cut from rolled sheet metal are processed in special machines to create channels and connection points as required.
Then, the hairs carried to the molds are placed in the mold with one piece on the bottom and one piece on top. The sheet spacing is arranged according to the desired thickness.
cold room sandwich paneerDuring l production, the eccentric lock mechanism to be installed on the panel is placed in the panel mould, male and female.
In cold room sandwich panels Polyurethane is injected between the two hairs until the sufficient density of 42 density is achieved.
After this process is completed, it is taken into the heated press and kept in the press for 45 minutes. After this process, frozen meat taken from the presssandwich breadCleaning operations around the area are carried out and taken to the storage section.
cold room sandwich paneerThe issues that need to be taken into consideration when producing l are as follows:
1-cold room sandwich paneerl hair thickness.
2 cold room sandwich paneerl polyurethane density These are very important.
3-cold room sandwich panelThe eccentric locking system is a phenomenon that allows the panels to lock together during assembly. This is also one of the important issues.
Polyurethane cold room panel The result of the system in the system is to prevent heat transfer.
If the material we use does not comply with these standards, our system will double the electricity bill.
Let's not forget that the best preservation method starts with heat transfer.