cold storageHere are some important tips to get you started:
1. Check the Cooling System
The cooling system is an essential part of any cold storage system. Therefore, it must be constantly monitored to ensure that it works smoothly. The following are the key components to check:
Cold room digital check the activity of your sensor:cold room You can use a different professional thermometer to measure the accuracy of the digital sensor. If you measure the coldness of the cold room and there is a difference between the temperature levels of the two appliances, it means that the refrigerator sensor needs to be fixed. Therefore, it is necessary to calibrate or replace it.
Examine your compressor: Some things to check include noise generated, electricity consumed, and cold produced. An unhealthy compressor will make too much noise and overheat. In this case, you should fix the problem immediately. Alternatively, if your refrigeration equipment is under warranty, you can contact your cold store for replacement.
Check the health of the evaporator daily: The evaporator is located in a cold storage facility. It takes heat from stored products. You should check daily, primarily focusing on air temperature, noise produced, water or oil leakage, and mold growth.
If it makes a loud or unusual noise, produces hot air, and has a water or oil leak, you should repair it as soon as possible. However, if it is extremely faulty, you should consider getting a replacement.
Perform a condenser quality check: The condenser is the outer part of the cooling system and its primary job is to cool the coolant. If the pipes to the refrigerant outlet are cooler, the condenser is healthy. If they are hot, it indicates that the equipment is not working properly and needs repair.
In particular, generalcold room you should perform a monthly functionality test of the cooling system and troubleshoot any faults. When making repairs, it is vital to work with a professional contractor with advanced knowledge of how cold storage rooms work.
2. Check All Electrical Connections
Checking all electrical connections in your cold storage facility is essential to ensure proper current flow. Cold storage If there is no power to some parts of the system, you can consult an electrician to find and repair the fault. There are also situations when fuses can fail. In this case, you should ask the electrician to replace the fuse.
3. Keep Facility Clean
your cold storage You should clean it regularly with suitable cold room cleaning products. This prevents the growth of microorganisms such as bacteria or mold that can contaminate stored items. Other ways to protect your cold storage facility from mold include:
Use a clean and fully functioning vent
Check and repair air leaks. Air leaks can cause temperature fluctuations, leading to mold growth, which can cause product damage.
Remove expired food items to prevent the spread of mold spores
Clean the cold room door seals regularly
Generally,cold storage Maintaining the internal hygiene and cleanliness of your system increases its efficiency.
4. Monitor the Humidity Level of the Cold Room
It is necessary to monitor the humidity level of the cold storage daily. If it exceeds the standard levels, it may cause mold or bacteria and thus product spoilage. Digital hygrometers are used to control humidity in most cold rooms and cold stores.
However, it is good to monitor the accuracy of the hygrometer using a professional hygrometer. If the two devices measure different humidity levels, it indicates that your hygrometer is not working properly. Therefore, you should calibrate or buy a new one.
5. Check the Cold Room's Walls, Floor, and Ceiling for Ice
Check and remove ice buildup on the walls, ceiling and floor of your cold room. It is important to remove the ice, especially if you are using the space to store vegetables and fruits, as any amount of ice can spoil them.
Large ice crystals cause cell wall damage and water migration; so fruits and vegetables become dry and shriveled. Therefore, it is very important to remove ice from cold room surfaces to ensure quality food.
Also, if you see a pile of ice, your temperature sensor, compressor, or evaporator may not be working properly. Therefore, you should inspect the equipment and make the necessary repairs.