Causes de panne de chambre froide

Technical verification of your cold room.

VISUAL CONTROL OF THE COLD ROOM

The technician should walk around the installation and check if any abnormal noise is reported

Cold storage

Verify the correct operation of all evaporator fans and the condenser fan of the cooling unit.

Check the correct temperature in the controller and the correct operating range for your cold room.

TECHNICAL CONTROL OF COLD ROOM

The refrigeration technician “High pressure” HP “Low pressure” LP must check the operating pressure and also check the correct gas load of the installation and therefore the compressor is correctly compressed.

Check the compressor ampere that indicates the weakness of the compressor.

The clogging speed of the filter should be strictly controlled by a temperature or pressure delta, if installation permits.

In some installations, large cold room installations will typically have a compressor oil drain.

FREQUENCY FAILURE OF COLD ROOMS

The list of common faults in cold rooms, such as HS fan or lack of gas, and a dehydrator clogged with larger failures of the HS compressor, as well as blockage of your cold room and gas type protection devices are used in the installation.

Arama formu

Causes de panne de chambre froide

Top News