HINGED COLD ROOM DOOR
40-42 density polyurethane was injected into the two sacaras without using any wood material. It is 68 mm in normal cold stores and 92 mm in frozen storage stores. When locked, it has the feature of opening from the inside and the antipanic arm is phosphorescent. Both sides of the standard production wing are PVC Sheet.
ISOTHERMAL SLIDING COLD STORAGE DOORS
All doors are heat insulated and their inner and outer sheets are produced from RAL 9002 galvalume.
Doors are produced by injecting 42 Density polyurethane, insulation material at all points.
The doors have a safety mechanism that can be opened from the inside.
Door thicknesses are the same as the panel thickness in the application area.
While there is no combustion product inside the door except polyurethane filling, there are 6 heat barriers specially in its frames.
The hinges in swing doors are of the rising and adjustable type, and the friction ratio with the floor decreases by rising as the door is opened.
SINGLE AND DOUBLE WING COLD ROOM FLIP FLAP DOORS
Single and double wing bar doors allow you to work even when your hands are full, with their structure that can be opened 180 degrees to both sides in your work areas. It reduces heat loss in ambient cooling areas (+12/+18).