Cold Room Basic Parts

Hello today, we will introduce you some parts used in cold stores and cold rooms.

Pressure Valve:

Pressure Valve is one of the most important parts used for -18 rooms.

Vacuuming effect starts when the cold stores start to drop below zero.This is a part that has a resistance and prevents the air from passing damp in order to prevent damage to the panels and to open the door easily.

Door Resistance:

- It is a piece that is used to prevent the ice mass formed by the humid air entering from the outside whenever the doors are opened in the peak rooms. Frosts inside the room when not in use do not freeze around the door. As a result, the door does not open and causes the door seal to tear when forced.

Door Switch:

Door switch Every time the door is opened, it stops the running fans and activates the lighting lamps.

When the person using the cold room forgets the door open, the transmitter indicates that the door is open. A very useful piece, the door switch is a good tool for cold rooms.

Cold Room Led Lamp:

LED lamps designed for cold rooms -40 plus 60 degrees heat resistant, moisture-free, long-lasting.

Cold room wall protection barrier:

The wall protection barrier is a hygienic antibacterial highly stylish, impact resistant material designed for cold rooms. The wall protection barrier, which is designed to prevent the impact of cold room panels, is produced in desired sizes and colors.

Cold room hygienic accessory:

Hygienic and antibacterial corner floor accessories designed for cold storage rooms are an aesthetically beautiful image, one of the indispensable cold room designs in accordance with Ministry of Health standards for hygiene.

Cold room shelves:

1 -304 chrome stainless steel shelves are the most preferred product in cold rooms manufactured in special sizes. There are height options according to the load weight and height.

2- Cold room wall edge shelf, which is made of special hygienic plastic against heat and impact, is a cheap material compared to 304 chrome shelves with weight width height options.

3- Heavy load and pallet racks are produced specially for cold rooms according to the length, width and weight shape produced for cold storage depots. There are also models that are only in the form of galvanize with their models painted with heat, moisture and impact resistant paint.

Cold room humidifier:

Cold room cold storage humidification device is a system that controls the humidity with moisture measurement sensors that can be programmed according to the desired humidity of the products. The only thing that needs to be done is to pull the water installation up to the humidification device in your cold room, the rest is already done by the system itself.

Cold room dehumidifier:

It is an industrial type system that leaves as much moisture as the product to be put in the cold room and removes the remaining moisture by drying. Here, the water collected from moisture should be discharged with the discharge method.

Cold room pvc curtain systems:

Cold room cold air tanks The importance of PVC curtain systems is to prevent the insect and insects from entering the room from outside to inside and outside to the inside of the cold room.

Antibacterial PVC strips, which can be installed in 3 different systems as suspended scroll and collection, are available in width and color options according to cold room coldness.

Cold room meat hanger:

The meat hanging apparatus, which is produced for cold rooms and cold stores, is made of 304 chrome material and is a disassembled type system with screwing system. The system, which is produced for hanging 1.5 tons of meat per square meter, is mounted in place with the screwing system in accordance with the dimensions by our expert team.

It is available in our 304 chrome transportation system suitable for meat transportation system.

Arama formu

Cold Room Basic Parts

Top News