Dorin Refrigeration Split Units and Prices

What Is a Dorin Refrigeration Split Unit?

Dorin split refrigeration units are complete cooling solutions consisting of a compressor, condenser, fan, electrical panel, pressure switches, and various auxiliary components.

The capacity of the refrigeration unit required for a cold room project depends on several factors, including room volume, product type, product inlet temperature, target temperature, ambient temperature, door opening frequency, and insulation characteristics.

Therefore, the selection should not be based only on compressor horsepower. The entire cold room system should be evaluated as a whole.

Dorin Refrigeration Split Unit Price List

The following price list has been prepared based on the provided Dorin models and price information.

Note: The prices have been transferred according to the provided list. Current prices may vary depending on exchange rates, stock availability, and project requirements.

Standard Equipment in Dorin Split Units

The standard equipment included in the provided Dorin split units consists of the following components:

• Crankcase heater
• Vibration absorber
• Liquid receiver
• Liquid receiver service valve
• Filter drier
• Solenoid valve
• Pressure gauge
• Enclosed electrostatic powder-coated cabinet
• European axial fan
• F&T condenser
• High- and low-pressure switch
• Fan pressure switch
• Integrated electrical panel

Having these components together provides significant advantages when establishing a complete refrigeration system.

Selecting a Dorin Refrigeration Unit for a Cold Room

When installing a cold storage facility, focusing only on the capacity of the refrigeration device is not sufficient. Panel thickness, door specifications, evaporator capacity, condenser capacity, and operating conditions should all be evaluated together.

For example, a small household cold room and a large commercial cold storage facility do not require the same cooling capacity.

The following factors should be considered when selecting a Dorin split unit:

• Cold room volume
• Characteristics of the stored product
• Target room temperature
• Product inlet temperature
• Door opening frequency
• Panel thickness and insulation value
• Evaporator and condenser capacity
• Compatibility of the electrical infrastructure

Cold Room Panels and Refrigeration Units Should Be Evaluated Together

A high-quality cold room panel helps reduce heat losses and allows the refrigeration system to operate more efficiently. Panel thickness, density, surface coating, joint details, and operating temperature should be considered during selection.

A cold room door also plays an important role in system performance. Frequent door opening, insufficient insulation, or an unsuitable door design may increase cold air losses.

Therefore, when researching cold room prices, it is important to evaluate the panel, door, evaporator, condenser, electrical panel, and installation together rather than considering only the refrigeration unit price.

What Determines Cold Room Door Prices?

Cold room door prices vary depending on the door dimensions, operating temperature, door type, insulation properties, and hardware used.

The door requirements of positive-temperature storage rooms may differ from those of frozen storage rooms operating at low temperatures. For this reason, project-based pricing generally provides more accurate results.

How Are Cold Room Panel Prices Determined?

Cold room panel prices depend on factors such as panel thickness, dimensions, surface properties, insulation material, and total panel area.

The panel quantity required for a small modular room is different from the quantity needed for a large industrial storage facility. Therefore, when researching cold room panel prices, the total panel requirement of the project should be considered rather than only the price per square meter.

Cold Room Refrigeration Equipment Prices

Cold room refrigeration equipment prices vary depending on capacity, compressor model, condenser and evaporator specifications, fans, and auxiliary components.

As shown in the Dorin split unit list, compressor, fan, condenser, and other equipment specifications change as capacity increases. Therefore, the technical requirements of the cold room project should be determined before selecting the right equipment.

Modular Cold Room Solutions

A modular cold room is a practical refrigerated space that can be produced in different dimensions and installed according to specific needs. Modular solutions can be used by food businesses, restaurants, supermarkets, butcher shops, delicatessens, hotels, and various commercial facilities.

In modular systems, the panel, cold room door, evaporator, and refrigeration unit should be evaluated as an integrated solution.

Turnkey Cold Room Solutions

A turnkey cold room solution may be preferred when all stages of the project are to be managed by a single team.

A turnkey cold room installation may include the following products and services:

• Cold room panels
• Cold room door
• Refrigeration unit
• Evaporator
• Condenser
• Electrical panel
• Control equipment
• Installation
• Commissioning

Keskinso evaluates the refrigeration system according to the room volume and intended use to create a suitable project-specific solution.

Portable Cold Storage and Container Cold Rooms

Portable cold storage solutions may be considered when constructing a fixed room inside a building is not possible or when a system is required for use at different locations.

Container cold room applications can also be used for logistics, food storage, and temporary or mobile storage requirements. In container cold rooms, panel insulation, the door, refrigeration unit, and electrical infrastructure should be evaluated together.

Capacity Selection for Dorin Refrigeration Units

The models in the provided price list range from approximately 9.9 to 78.3 in cooling capacity. This broad product range provides options for projects of different sizes.

• Models in the 9.9 capacity class may be suitable for smaller applications.
• Models in the 19.1–30.1 range may be considered for medium-sized applications.
• Models in the 38.9–47.2 range may be suitable for systems requiring higher capacity.
• Models in the 57.3–78.3 range may be considered for larger-capacity projects.

However, the final selection must be based on the actual project load, target temperature, operating environment, and usage conditions.

What to Consider When Requesting a Quote

When purchasing a refrigeration system, the complete system should be evaluated instead of focusing only on whether the initial price is low or high. The following information should be clarified:

• Cold room dimensions
• Room volume
• Target temperature
• Product type
• Daily product input quantity
• Product inlet temperature
• Door dimensions and usage frequency
• Panel thickness
• Evaporator capacity
• Condenser capacity
• Electrical connection
• Installation conditions

Based on this information, the appropriate cold room system and refrigeration capacity can be determined.

Cold Room Solutions by Keskinso

As Keskinso, we provide solutions for cold rooms, cold storage facilities, cold room panels, cold room doors, and refrigeration equipment.

We provide engineering and manufacturing services for a wide range of applications, from small household cold room projects to large commercial and industrial cold storage facilities.